LOAD-TRANSFER MECHANISMS IN TIMBER CONNECTIONS USING DENSIFIED WOOD AND STEEL DOWELS: AN EXPERIMENTAL AND NUMERICAL STUDY
LOAD-TRANSFER MECHANISMS IN TIMBER CONNECTIONS USING DENSIFIED WOOD AND STEEL DOWELS: AN EXPERIMENTAL AND NUMERICAL STUDY
DOI:
https://doi.org/10.22337/2587-9618-2026-22-3-23-34Keywords:
Timber connections, densified wood dowels, steel dowels, mechanical behaviour, load-transfer mechanism, finite element modellingAbstract
This study presents an experimental and numerical investigation of the mechanical behaviour of L-shaped timber connections assembled using densified wood dowels and steel dowels under ambient mechanical loading conditions. Mechanical tests were con-ducted on a multilayer timber beam–column connection to determine the load–displacement response of the joint system. In parallel, a three-dimensional finite ele-ment model was developed in Abaqus to simulate the structural behaviour and to inves-tigate the load-transfer mechanisms within the connection region. The numerical re-sults show good agreement with the experimental response, demonstrating the capabil-ity of the model to accurately reproduce the global behaviour of the connection. Alt-hough the two types of dowels exhibit relatively similar overall stiffness, the stress dis-tribution along the grain (S11) and the stress fields within the joint reveal fundamental-ly different load-transfer mechanisms. Steel dowels provide a more uniform stress dis-tribution and more efficient force transfer, whereas densified wood dowels exhibit more localized stress concentrations and a more compliant mechanical response. Nev-ertheless, the use of densified wood dowels may offer advantages in terms of material compatibility and potential thermal performance under elevated temperatures. The findings contribute to a better understanding of the mechanical behaviour of timber connections using different dowel types and provide a reference basis for future ther-mo-mechanical investigations of timber structures exposed to fire
References
M. Riggio, J. Sandak, and A. Sandak, “Densified wooden nails for new timber assemblies and restoration works: A pilot research,” Construction and Building Materials, vol. 102, pp. 1084–1092, 2016. https://doi.org/10.1016/j.conbuildmat.2015.06.045
B. Anshari, Z. Guan, A. Kitamori, K. Jung, I. Hassel, and K. Komatsu, “Mechanical and moisture-dependent swelling properties of compressed Japanese cedar,” Construction and Building Materials, vol. 25, no. 4, pp. 1718–1725, 2011.
K. Jung, A. Kitamori, and K. Komatsu, “Evaluation on structural performance of compressed wood as shear dowel,” Holzforschung, vol. 62, pp. 461–467, 2008.
K. Jung, A. Kitamori, and K. Komatsu, “Development of a joint system using a compressed wooden fastener I: Evaluation of pull-out and rotation performance for a column-sill joint,” Journal of Wood Science, vol. 55, pp. 273–282, 2009.
K. Jung, A. Kitamori, and K. Komatsu, “Development of a joint system using a compressed wooden fastener II: Evaluation of rotation performance for a column-beam joint,” Journal of Wood Science, vol. 56, pp. 118–126, 2010. https://doi.org/10.1007/s10086-009-1078-5
K. Jung, S. Murakami, A. Kitamori, W.-S. Chang, and K. Komatsu, “Improvement of glued-in-rod joint system using compressed wooden dowel,” Holzforschung, vol. 64, pp. 799–804, 2010. https://doi.org/10.1515/HF.2010.117
C. O’Loinsigh, M. Oudjene, H. Ait-Aider, P. Fanning, A. Pizzi, E. Shotton, and E.-M. Meghlat, “Experimental study of timber-to-timber composite beam using welded-through wood dowels,” Construction and Building Materials, vol. 36, pp. 245–250, 2012. https://doi.org/10.1016/j.conbuildmat.2012.04.118
B. H. Xu, M. Taazount, A. Bouchaïr, and P. Racher, “Numerical 3D finite element modelling and experimental tests for dowel-type timber joints,” Construction and Building Materials, vol. 23, no. 9, pp. 3043–3052, 2009. https://doi.org/10.1016/j.conbuildmat.2009.04.006
A. O. Feio, P. B. Lourenço, and J. S. Machado, “Testing and modeling of a traditional timber mortise and tenon joint,” Materials and Structures, vol. 47, pp. 213–225, 2014. https://doi.org/10.1617/s11527-013-0056-y
A. Arciszewska-Kędzior, J. Kunecký, H. Hasníková, and V. Sebera, “Lapped scarf joint with inclined faces and wooden dowels: Experimental and numerical analysis,” Engineering Structures, vol. 94, pp. 1–8, 2015. https://doi.org/10.1016/j.engstruct.2015.03.036
T. T. Tran and N. T. Dao, “Development of a hybrid elasto–plastic-damage material model for the analysis of adhesive-free lapped scarf timber joints,” Mechanics Based Design of Structures and Machines, 2026. https://doi.org/10.1080/15397734.2026.2632701
T. T. Tran, Q. B. Vu, T.-H. Tran, H.-N. Hoang, and T.-H. Nguyen, “Abaqus-based numerical modeling of a two-layer timber beam under fully composite and fully non-composite conditions,” Advances in Science and Technology Research Journal, vol. 20, no. 6, pp. 314–324, 2026. https://doi.org/10.12913/22998624/218005
T. T. Tran, V.-D. Thi, M. Oudjene, M. Khelifa, P. Girods, M. Debal, Y. Rogaume, and Y. Jannot, “Fire structural performance of thermo-mechanically compressed spruce timber by means experiments and a three-step multi-reactions pyrolysis 3D-finite element modelling,” Construction and Building Materials, vol. 320, p. 126100, 2022. https://doi.org/10.1016/j.conbuildmat.2021.126100
M. Khelifa, T. T. Tran, A. Khennane, M. Oudjene, and Y. Rogaume, “Thermal response of timber connections using densified wood dowels under fire,” Journal of Fire Sciences, vol. 42, no. 6, pp. 534–550, 2024. https://doi.org/10.1177/07349041241257262
T. T. Tran, M. Khelifa, M. Oudjene, M. Debal, and Y. Rogaume, “An experimental investigation of the thermomechanical performance of wood structures assembled with densified wooden dowels under fire exposure,” International Journal for Computational Civil and Structural Engineering, vol. 21, no. 4, pp. 73–82, 2025. https://doi.org/10.22337/2587-9618-2025-21-4-73-82
T. T. Tran, Modeling of Fire Performance of Timber Structures Assembled by Densified Wooden Dowels. PhD Thesis, University of Lorraine, France, 2021
Dassault Systèmes Simulia Corp., Abaqus Analysis User’s Guide, Version 2023
Eurocode 3, Design of Steel Structures – Part 1-2: Structural Fire Design, European Committee for Standardization (CEN), Brussels, Belgium, 1993.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 International Journal for Computational Civil and Structural Engineering

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
